Monday, October 8, 2012

MCD Innovation Gold Series Day/Night Shades


The old and the new!  In this picture you can see our old pleated day/night shade on the left above the dinette.  Both shades are in the "Night" position.  Notice the light coming in where the 2 vertical string holes are located.  The new pull down MCD light blocker shade is pictured on the right window above the couch.  The new shades are superior to the old.  There are six different light blocker fabrics to choose from. 



In this photo, both shades are in the "Day" position.  The Day shade utilizes MCD’s exclusive ClearView™ Solar Sun Screen to provide superior outward visibility, unsurpassed daytime privacy, and outstanding heat protection.  You can see out, but no one can see in. The night shade material, in the first photo, provides complete light blocking, 4-ply vinyl fabric. The advanced design allows you to effortlessly raise either shade with just a pull-to-release motion.



Since we installed the new shades ourselves, we decide to include step by step instructions for our friends who own a Monaco RV.  We found it easier to start by removing the existing window valance.  Remove the screw from the bottom left and right supports. 


Next, remove the plastic string holders on each side.  Be prepared for the blinds to drop open as you release the tension.  I could not believe that these screws were 3" inches long.  


Pull the metal portion of the shade below the bottom of the valance and twist it side to side, then pull out and up on the shade to access the upper screws that hold the shade in place.  See next photo. 


With the shade pulled outward its easy to access the upper installation screws.


To make things easier for me, I got Kathy to remove the upper screws.  It was easier to open the window which allows you to see and access the upper support screws.


Use a long Phillips Screwdriver #2 to remove the upper screws.  One on each side releases the old shade.  Move it out the way.


Next remove both upper screws that hold the valance in place.  Longer widths may have 3 or 4 screws to hold the valance.


You can then remove the entire valance.  Lay it on the floor with the back facing up.


Next, you installed the metal clips that will hold the shade in place.  Normally only 2 clips are used for shades under 30" inches.  For sizes larger than 30 inches, 3 clips are used .


Here you can see the clip installed.  The clip incorporates a slot in the center so you can adjust the clip from front to back.  


We also removed screws from two of the upper support brackets.  This was done to allow use of these holes for installation screws to reattach the valance. 


Here's Kathy fastening the new shade into the clips.  You can see she is placing the shade in the top of the clip then rotates the shade to clip it in place.  You will hear it click into place. Once installed, the entire assembly is ready to be mounted.  In the photo below, Kathy is pushing straight down to get the shade to click into place in the middle clip.  


In this photo you can also see the gold metal clips used to hold the top and front of the valance together.  They will be used to help with the installation. 


Here Kathy is starting the screws for anchoring the valance.  Be careful to only install these screws a 1/4" into the wood support or you will attach it to your floor.  You can see there's a gap that makes re-installing the valance fairly easy.   


Notice that the clear plastic wrap is still left in place around the blinds.  You should remove the small cardboard piece during this step, but leave the clear plastic wrap.


While I held the valance in place (I'm really there you just can't see me), Kathy uses a drill to fasten the 3 screws to anchor the unit to the bottom of the cabinet.   The final step is to Very Carefully remove the clear plastic wrap around the blinds.  


And we are done!  You can see the "Clear View" Solar Sun Screen shade pulled down on the two large windows and the complete light blocker shade pulled down on the smaller window. We installed 9 shades in about 3 hours.


Here's our left over screws.  The long screws were used to fasten the plastic string holders back on the 4th photo.  Can't remember where the other screws came from. We are delighted with the new shades.  Complete measuring and pricing information is available on the MCD website.  






Sunday, September 30, 2012

Amazon Camper Force Program


Welcome to Heartland RV park in Campbellsville, KY.  This park is one of several local campgrounds which become the 4-month home of many of the Camper Force individuals who work the holiday seasonal period for Amazon.  Three of the Amazon distribution centers hire Camper Force people.  They are located in Campbellsville KY, Fernley NV,  and Coffeyville KS.  These centers do not have enough local residents available to work temporarily to supplement the full-time personnel to handle the increase in orders during the busy holiday season.


This is the office for the RV park which starts to get pretty busy around the end of September as the work campers arrive.  


Here's the clubhouse which Amazon uses to greet new Camper Force workers.  During the meeting, you get your shift information, job assignment, and are briefed on pay and other pertinent information.  Additionally, they take photos of you for your Amazon ID badge.  The building is also used for park gatherings such as pot luck dinners and other park functions.


 Here we are parked in site number 90.  The park has 111 sites of which 58 are occupied as of this posting. All the sites have been reserved for additional personnel scheduled to arrive in the next couple months.


You can see in this photo that the campground has several layers.  All sites are gravel with full hook-ups. Amazon pays for our campground site, including electricity and wifi, each month of employment. We arrived August 30th for a September 3rd start date.  Not too many RV's in the park!  If you look very closely, you will see the Amazon name on the white building in the distance.  That is where we walk to work.


This is the level where we originally parked until the first rain storm.  We learned that the water does not drain well from this level and decided to move to a lower level.   Also, some sites are larger than others. 


The primary reason we selected this RV park is that its location is right across the street from Amazon.  We can walk to work in a matter of minutes which helps a lot when you get up at 5 a.m. 


I took this photo of a scanner used at the local Walmart.  We use a comparable scanner at Amazon but due to proprietary reasons no one is permitted to take photos inside the building.  


One great benefit of working here in Campbellsville is Amazon Camper Force workers can eat at Campbellsville University.  You can purchase a 10-meal pass for $55 dollars which means meals cost $5.50 per person.  You can't eat and drink at McDonald's for that amount and the food is considerably better.


Here's a picture of our new friends, Dave and Judy.  They own the fifth wheel parked next to us. We are at one of Judy's favorite dining places the local Dairy Queen.  We enjoyed the chicken tenders and also the Ice Cream for dessert.  They are in their second season as work campers for Amazon.  They have a wealth of local information as well as being great neighbors.

Friday, August 31, 2012

FMCA's Motorhome Rally - Indianapolis IN

The FMCA's 87th Family Reunion and Motor Home Rally was hosted at the Indiana State Fairgrounds August 27-30, 2012.  More than 160 seminars covering technical, lifestyle, and other topics are offered for attendees.  Here's the caravan entering I-69 South towards Indianapolis.  The pictures were taken by Margie & Vaughn Wood who was holding up the rear of the caravan.


We were number three out of five coaches that traveled together for the rally.  We met up with the group at a local fuel stop off of I-69, to configure the caravan.  


We arrived safely midday Saturday at the fairground and were parked in the 30-amp electric area.  Due to the extreme heat, they turned on the generators early and allowed all the rigs to hook up to cool down.   


Just our luck, we were parked right next to the generator.  You have great power when you are close to the unit, but sleeping is an entirely different matter.  Not so bad when the rear A/C is running as it does drown out the generator noise somewhat. 


I would estimate there were 500-600 coaches parked in the in-field and almost that many parked in various other areas of the fairgrounds.  


After Ron & Janice had to move their coach because they had been erroneously instructed to park directly in front of the generator, the group settled in and discussed how we would have parked all these rigs. After careful consideration, we decided that dinner was more of a priority.  So Pizza it was!


On the second day it started to rain, and rain, and rain.  Did I say "It Rained".  The water got so high that the generator stopped since most of the electrical connections were under water. Keep an eye on the smaller coach to the right of the generator.


This is a case of being in the wrong place at the wrong time.  Notice the guy in the right side of the photo.  The water was up to his knees.  A few more feet of water and the little coach may have drifted away!


After the rain settled down everyone came out for a look.  We had to take up our Welcome mat as it started to float away.  Three hours after this photo the water subsided enough that we could again hook up to the generator.


At the Pepsi Coliseum for the first night performance.  

Wednesday night we visited downtown Indianapolis with Todd and Gloria and had dinner at a local restaurant.  We decide to leave the rally on Thursday to beat the rain to Campbellsville Ky.   We did not want to arrive on Friday and have to set up the coach in the pouring rain which is expected from hurricane Isaac. 

During the rally we purchased nine MCD Gold Series Day/Night Shades for the inside of our motor home. The shades will take about four weeks to arrive and we will install them ourselves.   We also purchased several replacement cabinet door hinges from the Alliance Coach mobile parts trailer.  

We thoroughly enjoyed the company of our fellow rally members Ron & Janice, Vaughn & Margie, Terry & Kathy , Jerry & Sharon, and Mick & Chris .  We thank them for the great hospitality, food and camaraderie. 






Wednesday, August 1, 2012

The Old & the New RV Faucets


Here is a photo of the original sink faucet that came with the RV.  It's a delta knock off and once it starts leaking you cannot replace any of the parts so you have to purchase a new faucet. You can see it has a single handle and the front head pulls out as a sprayer.  The unit to the left is for filtered water which Dave only used for making spaghetti. 


We decided to upgrade the unit for something more practical.  We examined all the faucets from Lowe's, Home Depot and Menard's.   We decided on the Delta Bellini from Lowe's.  It provides a single handle, side-sprayer, soap dispenser and  incorporates a high arcing spout.  With our military discount, the unit and supplies were slightly under $200 dollars. 


Here's a close up view of the new unit installed.  The unit provides excellent water flow for the spout as well as the sprayer.  The soap dispenser can be easily refilled by removing the head and pump assembly and pouring the new solution into the bottle. 


The Bellini  has a stainless finish and incorporates diamond embedded discs that offer unsurpassed protection against leaks.  The unit has a lifetime warranty from Delta. 


Remember when I mentioned the high arcing spout.  Look again at the first photo.  With the old faucet it was impossible to fill even a glass of water with the top sink covers in place.  You can see here that you can easily fill a large pot with the new spout.   


Here's a photo of the shut off valve connected to the water supply line.  I used plumber's goop between the brass fitting and the bottom of the shut off valve.  This will ensure no leaks.  I do not however recommend the use of the plumber's goop on the plastic connection from the main water supply. 


Here's a photo of the new faucet in the bathroom.  We also replaced the faucet in Kathy's sink. The old units leaked had to be replaced.  






Pulling up Anchor at Acadia National Park

 I thought it would be nice to add a few facts about Acadia National in each of the photos below. We decided that our last trip here at Acad...